Newly purchased air compressor accessories: Before they are not used, they are usually stored in a warehouse. At this time, the space should be dry and not in contact with other corrosive components. The storage requirement is to not affect the performance of the components as its purpose. Wrap with greased paper, etc. to avoid rust. Mark the item name in detail, which is more convenient when searching and reduces the chance of error.

After the compressor is stopped, the used accessories are placed indoors, which reduces the possibility of sunlight and rain. If conditions do not allow it to be placed outside, it must be covered externally. At the same time, do a good job of maintenance, clean discharge of oil, condensate, etc. This is done from a good point of view, the arrangement and internal structure, the purpose is that when the machine is turned on again, the equipment can run smoothly.

When repairing the solenoid valve of the air compressor, you need to check the cause first. Although sometimes the performance of the fault is similar, the problem may be completely different. At this time, don't rush to disassemble the machine first to avoid more losses caused by wrong steps. Professionals should know that any air compressor accessory has its own working principle and characteristics, and the solenoid valve is no exception. The most common reason for its failure is the pressure problem, which exceeds the value range set at the factory. No adjustments were made in a timely manner.