Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Industrial Silk 30HP 8Bar Direct Driven Screw Air Compressor Air Cooling
rotary screw air compressor
,screw type air compressors
For Industrial Use Silk LG-3.6/8G 30HP 8Bar Direct Driven Screw Air Compressor
The advantage of the 22kw air compressor
A-Remarkable Screw Air Compressor end:Germany original-building GHH_RAND air end adopts the third-generator dissymmetrical gear shape.The main rotor is five gears and the vice rotor is six gears.
B-As to differences between them is small,the loss of circumfluence is small which increases the cubage efficiency by close to 20% and save the electric currency by about 25% compared to normal
screw air compressor.
C-The rotor is dissymmetrical shape,supported by ball bearing and rod bead bearing and operating at a low speed so it can lower the maintenance cost and provide the air end with a longer service life.
D-Gas Intake valve:The ac compressor Controlled by computer,the stable and dependable air displacement air inlet control valve can make the air displacement and
power consumption of the motor change along with the air consumption,so as to save energy and electricity,and reduce the operating cost.
E-Oil and gas separator:Screw air compressor shaped design of oil and gas separator is easy to uninstall and change.Separator core can separate the left oil in the process of compressing air.2ppm.
this will increase the cleanness of the compressed air and lower the pollution to the compressed air and lower the pollution to the compressed air and equipment.
F-Oil filters of ac compressor:High efficient oil separator can remove the impurity from the lubricant and provide clean
lubricant for the pump,rotor and bearing.
G-Motor of the screw air compressor:Famous brand motor with F class isolation and IP54 protecting class.It uses imported SKF durable bearing and can be operated all day long.
| Model |
LG-3.6/8G direct driven screw air compressor |
| Air displacement | 3.6 m3/min (126cfm) |
| discharge pressure | 0.8Mpa / 8Bar |
| Air supply temperature | ≤ environment temperature +10 °C |
| Motor power | 22KW/30HP |
| Voltage | 380 V/400V/420V etc |
| Connector | G1 |
| type of cooling | Air-Cooled |
| weight | 650KGS |
| size(L*W*H) | 1080*880*1415mm |
55KW 75HP 8bar Industrial Screw Air Compressor 350cfm Asynchronous Direct Drive
Intelligent air receiver for compressor / Air Compressor expansion tank 1.0m³
220v Industrial Air Dryer Electric Refrigerated Air Compressed Dryer
