|
Product Details:
Payment & Shipping Terms:
|
| Cooling Way: | Air Cooling | Configuration: | Stationary |
|---|---|---|---|
| Warranty: | 1 Year | Power Source: | AC Power |
| Highlight: | refrigeration air dryer,refrigerated air dryer dew point |
||
Description:
High-temperature and wet compressed air enters the pre-cooling temperature recovery device from the air inlet, and implements heat exchange with the cooled low-temperature compressed air flowing through the evaporator to release part of heat energy and remove remaining water content. At this time, the compressed air after level-1 cooling and dewatering enters the evaporator and implements heat exchange with evaporator to remove the remaining water content; then, the steam-water separator will separate water content from the compressed air, and liquid water will be drained through the electric drain valve; but the low-temperature and dry compressed air will be back to the pre-cooling temperature recovery device to absorb the high-temperature compressed air heat at the inlet position to make it.
Features of Kaishan Brand Air Dryer:
1. Refrigeration compressor adopt High-temperature type enclosed refrigeration compressors,so that have steady running ,low noise ,reliable performance and energy saving.
2. heat exchanger and condenser used high quality and effecient screwed conduit, it has a high heat transfer coefficient that small in sizeand Compact structure
3.Refrigeration control elements adopt units of ALCO, which is advanced in the world,with a high performance
4. liquid-vapor separator can make gas-liquid separation effect completely and avoid water the second evaporation , so that confirm the drying effect of the dryer.
5. Rasonable structural designmake it easy to maintaining as well as elegant appearance.
6.Without foundation installation, easy to operation.
7. Has a high cost-effective .
| Air inlet temperature |
Room temperature: ≤45°C High temperature: ≤80°C |
| Cooling way | Air-cooling |
| Environment temperature | ≤38°C |
| Pressure dew point | 2-10°C |
| Air inlet pressure | 0.6-1.0Mpa |
| Pressure loss | ≤5% of working pressure |
| Model | Air Processing (m³/min) | Power(HP) | Voltage (V) | Power of fan (W) | Connector | Dimension (mm) | |
| KSAD-0.5SF | 0.65 | 1/4 | 220 | 1X55 | RC1/2″ | 580X350X555 | |
| KSAD-1SF | 1.2 | 1/3 | 220 | 1X90 | RC1″ | 640X380X575 | |
| KSAD-2SF | 2.5 | 3/4 | 220 | 1X55 | RC1″ | 650X430X700 | |
| KSAD-3SF | 3.6 | 1 | 220 | 1X150 | RC1″ | 850X450X700 | |
| KSAD-4.5SF | 5 | 1.5 | 220 | 1X240 | RC11/2″ | 1000X490X730 | |
| KSAD-6SF | 6.8 | 2 | 220 | 2X150 | RC11/2″ | 1050X550X770 | |
| KSAD-8SF | 8.5 | 2.5 | 220 | 2X195 | RP2″ | 1200X530X946 | |
| KSAD-10SF | 10.9 | 3 | 380 | 2X195 | RP2″ | 1320X530X946 | |
| KSAD-12SF | 12.8 | 3 | 380 | 2X195 | RP2″ | 1100X620X1426 | |
| KSAD-15SF | 16 | 3.5 | 380 | 2X195 | DN65 | 1500X780X1666 | |
| KSAD-20SF | 22 | 4.2 | 380 | 2X190 | DN65 | 1540X840X1610 | |
| KSAD-25SF | 26.8 | 5.3 | 380 | 2X250 | DN80 | 1610X860X1870 | |
| KSAD-30SF | 32 | 6.7 | 380 | 2X250 | DN80 | 1610X920X1860 | |
| KSAD-400SF | 43.5 | 8.3 | 380 | 3X250 | DN100 | 2160X960X1863 | |
| KSAD-50SF | 53 | 10 | 380 | 3X250 | DN100 | 2240X960X1980 | |
| KSAD-60SF | 67 | 13.3 | 380 | 3X460 | DN125 | 2360X1060X1930 | |
| KSAD-80SF | 90 | 20 | 380 | 4X550 | DN125 | 2040X1490X1930 |
Reliability - Air dryers offer a steady pressure dew point down to 3°F/37,4°F, with no freezing of condensed moisture, and no chance of moisture entering the compressed air system. They are constructed from generously sized, quality components. A simple and proven design is backed up by an effective control system (hot gas bypass) to ensure reliable performance.
Contact Person: Mrs. Christina
Tel: +8615905700688
Fax: 86-570-3865123
