1MPa / 10 Bar Working Pressure Screw Stationary Air Compressor 6.5 m3 / min Capacity FDA

Specification

Features

The operation of the economic costs

The system using 0-100% capacity no level adjust. When the air comsumption decrease, the capacity is follow decrease, Motor current is also reduced; When not using air, air compressor run idle, long time run idle will automatic stop. When the air comsumption increase, recover working. Optimal effect energy saving.

Good environmental adaptability

Powerful cooling system design, especially suitable for high temperature and high humidity environment in Asia. Good technique of vibration isolation and noise reduction measures, making Silk brand screw air compressor installation without special foundation, just leave a smallest ventilation and maintenance space, can placement your compressor.

The design of the screw rotor type line features:

1. Fully realized "Convex-Convex" conjunction, thus helping to form hydrodynamic lubrication film, Reduced through contact with transverse leakage, Improve the efficiency of the compressor; And improve the performance of machining and inspection on the rotor.

2. Use "big rotor, bearing, low speed" design train of thought, rotate speed 30 to 50% lower than the other brands, can reduce noise and vibration, reduce the temperature of exhaust air, improve the rotor rigidity, prolong service life, reduce the sensitivity to oil and impurities carbide.

3. Power range:4-355KW, which 18.5-250KW are direct connects not with gear box,200KW and 250KW more direct connects the 4 pole motor, low speed to 1480 r/min.

4. Fully meet or surpass GB19153-2003 <<Volumetric air compressor energy efficiency limit value>> of national standard.

Mian parts Introduction

1.Remarkable Air end:Germany original-building GHH_RAND air end adopts the third-generator dissymmetrical gear shape.The main rotor is five gears and the vice rotor is six gears.

2.As to differences between them is small,the loss of circumfluence is small which increases the cubage efficiency by close to 20% and save the electric currency by about 25% compared to normal screw air compressor.

3.The rotor is dissymmetrical shape,supported by ball bearing and rod bead bearing and operating at a low speed so it can lower the maintenance cost and provide the air end with a longer service life.

4.Gas Intake valve:Controlled by computer,the stable and dependable air displacement air inlet control valve can make the air displacement and power consumption of the motor change along with the air consumption,so as to save energy and electricity,and reduce the operating cost.

5.Oil and gas separator:Screw shaped design of oil and gas separator is easy to uninstall and change.Separator core can separate the left oil in the process of compressing air.After separating,the left oil will be about 1-2ppm.this will increase the cleanness of the compressed air and lower the pollution to the compressed air and lower the pollution to the compressed air and equipment.

6.Oil filters:High-efficient oil separator can remove the impurity from the lubricant and provide clean lubricant for the pump,rotor and bearing.

7.Motor:Famous brand motor with F class isolation and IP54 protecting class.It uses imported SKF durable bearing and can be operated all day long.

Specification for other models